Brand Overview

Siemens

Siemens is widely used for industrial control, visualization, and drives—popular for SIMATIC PLC/HMI and SINAMICS drives. Provide part numbers for quick compatibility checking.

SIMATIC PLC
S7-1200
S7-1500
SIMATIC HMI
SINAMICS Drives
VFD / Inverters
Servo & Motion
PROFINET
Comms Modules

Disclaimer: General introduction only. No official authorization implied. Final scope and terms are subject to confirmed order.

PLC

Servo Drive

Servo Motor

Switch

Siemens

Siemens

Siemens 8UC7110-6BD Industrial Power Supply Switch Mode Power Supply Module for Automation Control Systems

Siemens SIMOTICS S-1FL6 Servo Motor 1FL6042-2AF21-1AA1, 0.75 kW, 3000 rpm, 2.39 Nm, TTL Incremental Encoder 2500 S/R (13-bit), IP65, Low Inertia, IM B5, Feather Key Shaft, Cable Outlet

Siemens SIMOTICS S-1FL6 Servo Motor 1FL6034-2AF21-1AG1, 0.40 kW, 230V 3AC, 3000 rpm, 1.27 Nm, Incremental Encoder TTL 2500 S/R, IP65, Low Inertia, B5 Flange, Plain Shaft

Siemens SINAMICS V90 6SL3210-5FB10-8UF0 Servo Drive with PROFINET, 0.75 kW, 200–240 VAC (1/3-Phase), 45–66 Hz, 4.70 A Rated (14.10 A Max), IP20, Natural Convection, Frame FSC, 80×170×195 mm

Siemens SINAMICS V90 6SL3210-5FB10-4UF1 Servo Drive with PROFINET, 0.4 kW, 200–240 VAC 1/3-Phase, 2.6 A Rated (7.8 A Max), 45–66 Hz, IP20, 55×170×170 mm

Siemens SINAMICS V90 6SL3210-5FB10-4UA1 Servo Drive (PTI Pulse Train), 0.4 kW, 200–240 VAC 1/3-Phase, 2.6 A Rated (7.8 A Max), 45–66 Hz, IP20, Natural Convection, Frame FSB

Siemens SCALANCE 6GK7277-1AA10-0AA0 Compact Switch Module CSM 1277, Unmanaged Industrial Ethernet Switch, 4×RJ45 10/100 Mbps, 24VDC (19.2–28.8V), 1.6W, IP20, for SIMATIC S7-1200

Siemens SIMATIC S7-1500 6ES7553-1AA00-0AB0 Technology Module TM PTO 4, 4-Axis Pulse Train Output for Stepper Drives, 24VDC / RS-422 / TTL 5V, Up to 200 kHz (24V/TTL) or 1 MHz (RS-422), 24VDC Supply (19.2–28.8V)

Siemens SIMATIC S7-1500 6ES7531-7KF00-0AB0 Analog Input Module, AI 8xU/I/RTD/TC ST, 8 Channels, 16-Bit Resolution, 0.3% Accuracy, Diagnostics & Hardware Interrupts, 24VDC (19.2–28.8V), Front Connector Separate

Siemens SIMATIC S7-1500 6ES7521-1BH00-0AB0 Digital Input Module, DI 16×24 VDC HF, 16 Channels (1 Group), 2 Counter Inputs, 0.05–20 ms Input Delay, IEC 61131 Type 3, Diagnostics, Hardware Interrupts

Siemens SIMATIC S7-1200 6ES7241-1CH30-1XB0 Communication Board CB 1241 RS485, 2-Wire Half-Duplex, Freeport/ASCII/Modbus RTU, Terminal Block, 1000 m Cable, IP20

Siemens SIMATIC S7-1200 6ES7215-1AG40-0XB0 CPU 1215C DC/DC/DC, 2×PROFINET, 14 DI 24VDC, 10 DO 24VDC (0.5A), 2 AI 0–10V, 2 AO 0–20mA, 24VDC Supply (20.4–28.8V), 200KB Memory